top of page
Writer's pictureBill Rollison

Different types of Electric Water Heater Repairs

Updated: Aug 24, 2022

There are several types of repairs that can be performed on hot water heaters. Some of the most common include replacing the thermostat, rebuilding the heating element, and flushing the tank.


Replacing the thermostat is a relatively simple repair that can be done by almost anyone. The first step is to turn off the power to the hot water heater. Next, remove the access panel and locate the thermostat. Once you have found it, disconnect the wires and remove the old thermostat. Install the new thermostat by connecting the wires and screwing it into place. Finally, replace the access panel and turn on the power to the hot water heater.


Rebuilding the heating element is a more difficult repair that should only be attempted by someone with experience. The first step is to turn off the power to the hot water heater. Next, remove the access panel and locate the heating element. Once you have found it, disconnect the wires and unscrew the element from its housing. Install the new heating element by screwing it into place and connecting the wires. Finally, replace the access panel and turn on the power to the hot water heater.


Flushing the tank is a relatively simple repair that can be done by almost anyone. The first step is to turn off the power to the hot water heater. Next, open the drain valve at the bottom of the tank and allow all of the water to drain out. Once all of the water has drained, close the drain valve and turn on the water supply. Turn on the power to the hot water heater and allow the tank to fill up. Once it is full, turn off the power and open all of the faucets in your home to release any air that may be in the lines. Finally, turn on the power to the hot water heater and allow it to heat up the water.


These are just a few of the most common repairs that can be performed on hot water heaters. If you are having problems with your hot water heater, it is best to consult with a professional before attempting any repairs. They will be able to diagnose the problem and recommend the best course of action.


Different Types of Gas Hot Water Heater Repairs


If your gas hot water heater isn't working properly, there are a few different types of repairs that you may need to have done. Here is a look at some of the most common repairs that are needed for gas hot water heaters:


1. Replacing the Thermostat


One of the most common repairs that is needed for gas hot water heaters is replacing the thermostat. If your hot water heater's thermostat is not working properly, it can cause the water to become too hot or not hot enough. In some cases, it may even cause the water to become scalding hot. Replacing the thermostat is a relatively simple repair that can be done by a qualified technician.


2. Replacing the Gas Valve


Another common repair that is needed for gas hot water heaters is replacing the gas valve. The gas valve is responsible for controlling the flow of gas to the burner. If the gas valve is not working properly, it can cause the burner to either not ignite at all or to improperly ignite, which can lead to a dangerous situation. Replacing the gas valve is a more complicated repair than replacing the thermostat and should only be done by a qualified technician.


3. Cleaning or Replacing the Burner


If your hot water heater's burner is dirty or faulty, it can cause the unit to not work properly. In some cases, simply cleaning the burner will fix the problem. However, in other cases, the burner may need to be replaced entirely. This is a more complicated repair that should only be done by a qualified technician.


4. Replacing the Pilot Light


If your hot water heater's pilot light is out, it can prevent the unit from working properly. In most cases, simply relighting the pilot light will fix the problem. However, if the pilot light will not stay lit, it may be necessary to replace it. This is a more complicated repair that should only be done by a qualified technician.


5. Checking for Gas Leaks


One of the most dangerous problems that can occur with gas hot water heaters is a gas leak. If you suspect that there may be a gas leak, it is important to have the unit checked by a qualified technician immediately. Gas leaks can be extremely dangerous and should never be ignored.


If your gas hot water heater isn't working properly, there are a few different types of repairs that you may need to have done. Replacing the thermostat, gas valve, or burner are some of the most common repairs that are needed. Checking for gas leaks is also important if you suspect that there may be a problem. If you're not sure what's wrong with your unit, it's always best to call a qualified technician for help.



19 views0 comments

Recent Posts

See All

Comments


bottom of page